Comtrol DeviceMaster MOD Series Hardware Installation And Configuration Manual page 36

Preparing the DeviceMaster for Configuration
36 - Preparing the DeviceMaster for Configuration
4. Click Scan to locate the Comtrol Ethernet-attached products including the
DeviceMaster on the network.
Note: If you do not have any RocketLinx managed switches or IO-Link
Masters, it saves scanning time if you do not scan for them.
5. Highlight the DeviceMaster for which you want to program network
information and open the Properties screen using one of these methods.
• Double-click the DeviceMaster in the Device Tree or Device List pane.
• Right-click the DeviceMaster in the Device Tree or Device List pane and
click Properties in the popup menu
• Highlight the DeviceMaster in the Device Tree or Device List pane and click
the Properties button.
• Highlight the DeviceMaster, click the Manage menu and then Properties.
DeviceMaster MOD | UP Hardware Installation and Configuration Guide: 2000630 Rev. B