Comtrol DeviceMaster MOD Series Hardware Installation And Configuration Manual page 70

Managing the DeviceMaster
70 - Managing the DeviceMaster
6. Select Telnet or SSH, leave the Selected Port number, and click Ok.
7. Press Enter. You can type help to review the RedBoot commands. You can also
refer to RedBoot Command Overview
Note: The dm prompt should be replaced by a redboot prompt. If not, you can
reset the Bootloader timeout for a longer time period and retry this
procedure.
DeviceMaster MOD | UP Hardware Installation and Configuration Guide: 2000630 Rev. B
on Page 77.