Redboot Procedures; Accessing Redboot Overview - Comtrol DeviceMaster MOD Series Hardware Installation And Configuration Manual

Table of Contents

Advertisement

Accessing RedBoot Overview

DeviceMaster MOD | UP Hardware Installation and Configuration Guide: 2000630 Rev. B

RedBoot Procedures

You can use this section as a reference if you want to perform tasks in RedBoot.
Accessing RedBoot Overview
Establishing a Serial Connection
Establishing a Telnet Connection
Determining the Network Settings
Configuring the Network Settings
Changing the Bootloader Timeout,
Determining the Bootloader Version
Resetting the DeviceMaster
Configuring Passwords
RedBoot Command Overview
Optionally, you can install PortVision DX on a Windows system on the network
and perform all of these tasks. PortVision DX provides a Telnet/SSH session,
which is discussed in
Accessing RedBoot Commands in Telnet/SSH Sessions
(PortVision DX)
on Page 68.
To access RedBoot, you can use one of the following methods:
A serial connection between Port 1 on the DeviceMaster and a COM port on a
PC (Page 72). If you plan on using the serial method, you will need a null
modem cable, a terminal program installed and configured on the PC, and a
Bootloader Timeout value in excess of 15 seconds. If the Bootloader Timeout
value has been reduced to 1 second, this procedure will NOT be possible.
Note: Use the serial connection method, if the DeviceMaster is not on the same
Ethernet network segment as the PC.
If you do not know the IP address of the DeviceMaster you must use a serial
connection to communicate with the DeviceMaster.
A telnet connection (Page 73), if the DeviceMaster is locally accessible by
Ethernet. A telnet connection requires that you know the IP address. In
addition, the IP address must also be valid for the network to which it is
attached.
For example: The network segment must be 192.168.250.x to telnet to the
DeviceMaster default IP address if you have not changed the IP address to
operate on your network.
on Page 71
on Page 72
on Page 73
on Page 74
on Page 74
Page 75
on Page 75
on Page 76
on Page 76
on Page 77.
RedBoot Procedures - 71

Advertisement

Table of Contents
loading

Table of Contents