BT NetAgent Series User Manual page 94

3. Use IE browser to update (suitable for BK,CK,DK,BP,CP,DP version)
Issued by: BT
Version no: 6.1
Date: March 2019
- Once the account and password been checked, the server will response with
230 OK to indicate Login succeeded.
- If entered wrong account and password, the server will response with 530
Not Logged in to indicate Login failed.
2.3. Operation commands as followings:
-1s: This command is to request server to list up all the file and sub file under
current Menu.
User may finds out the firmware version of the NetAgent UPS of its IP.
-put<client's file route>: This command is to ask the client to copy its specific
file route to the Server point. User may use this method to upload the latest
firmware to the remote NetAgent
-quit: This command is to allow the user to logout with the current username
account as well as close the connection of FTP.
For example: The picture below is to upload the latest NetAgent firmware file
(c:\ work\netagent\prjs\nag\2.32.DK520.bin ) which is in this computer to
the NetAgent UPS with IP address of 192.168.50.179
This method is to enter the account, password and IP address of the NetAgent UPS
which the user wish to update under the website column. Once entered, user may
see the current firmware version, and then please copy the latest firmware to here
to complete the updating process.
Two method of entering:
3.1. ftp://admin:password@192.168.50.179
BT UPS Enterprise SNMP Agent
Page 94 of 103