BT NetAgent Series User Manual page 43

Community
This section is to set a Community name for NMS. The community name has to be as the
same as the setting in NMS.
Permission
This section is to set authorities of administrators. Options are Read, Read/Write, and No
Access.
Username/password
When select SNMPv3, username/password must be entered. Password must be at least 8
characters. Sender and Recipient's password must match to communicate.
Authentication
This is to select between MD5 and SHA. Length must be at least 8 characters.
Privacy
This is to select DES and AES. Length must be at least 8 characters
5.2.7.3
Manager IP Address
This section is to set the IP address that the administrator can manage NetAgent from. It is
valid for up to 8 IP addresses. To manage NetAgent from any IP address, enter *.*.*.* into
Manager IP address.
Version
This is to select between SNMPv1& SNMPv2 or SNMPv3 (SNMPv3 only applies to NetAgent
9 series)
Community
This section is to set a Community name for NMS. The community name has to be as the
same as the setting in NMS.
Permission
This section is to set authorities of administrators. Options are Read, Read/Write, and No
Access.
Username/password
When select SNMPv3, username/password must be entered. Password must be at least 8
characters. Sender and Recipient's password must match to communicate.
Authentication
This is to select between MD5 and SHA. Length must be at least 8 characters.
Privacy
This is to select DES and AES. Length must be at least 8 characters.
Description
This section is for an administrator to make notes.
Issued by: BT
Version no: 6.1
Date: March 2019
Access Control
BT UPS Enterprise SNMP Agent
Page 43 of 103