Dns Server Ip; Ethernet; Dynamic Dns; Domain Name - BT NetAgent Series User Manual

This section is to set NetAgent Gateway.
Obtain an IP address
This section is to choose to set NetAgent IP address manually or via DHCP.
The above 4 sections can be set in Netility as well. NetAgent will reboot after any of the above are
changed.
5.2.5.2
Primary DNS Server IP
This section is to set NetAgent primary DNS Server IP address.
Secondary DNS Server IP
This section is to set NetAgent secondary DNS Server IP address. NetAgent will use the
secondary DNS Server IP address when the Primary DNS Server IP address is not working.
5.2.5.3
Connection Type
This section is to set communication speed between NetAgent and Network. NetAgent will
reboot after Connection Type is changed.
Stop UPS communication when Ethernet disconnected
This section is to set if to stop UPS communication when NetAgent disconnects with

Ethernet.

5.2.5.4
This is a free service that allows the user to alias a dynamic IP address to a static hostname
Sevices Provider
NetAgent can be configured to register with any of the Dynamic DNS providers. In general,
to register a Domain Name;
a.
b.
c.
d.

Domain Name

This is the Domain Name you have created from the above selected DDNS provider.
Login Name
This is the Login / Account name that you have created with the selected DDNS provider.
Login Password
Issued by: BT
Version no: 6.1
Date: March 2019

DNS Server IP

Ethernet

Dynamic DNS

Go to the DDNS provider website listed .
Register a new user account and password with the DDNS provider.
Choose a Domain Name to point to your current Dynamic IP
Enter information obtained in (b) and (c) into NetAgent DDNS fields
BT UPS Enterprise SNMP Agent
Page 39 of 103