6 Telnet (Remote Configuration)
6.1 Introduction
NetAgent supports multiple Network Management systems and LAN protocols. After
finishing hardware installation, you are now able to choose any utilities that provided by
NetAgent to monitor and control UPS.
Here are introduction for using Telnet.
6.2 Telnet Configuration
•
Fig.58 Telnet startup
•
Fig.59 Telnet Connection
•
Fig.60 Telnet: Input User Name / Password
Issued by: BT
Version no: 6.1
Date: March 2019
Select "Start" from Windows, click "Run" to key-in NetAgent IP Address
Successful link-up display:
Initial to setup, please press "Enter" to enter telnet main screen. If the User
Name and Password had been set before, please enter actual value to access.
BT UPS Enterprise SNMP Agent
Page 65 of 103