Receiver Cellular Number And Message Content; Netswitch (Bt Series Only); Netswitch Setting - BT NetAgent Series User Manual

5.2.11.3 Receiver cellular number and message content

To send instant SMS, enter recipient's mobile number and SMS text with configurable of
Unicode or Character format

5.2.11.4 NetSwitch (BT series only)

When BT NetAgent connects with NetSwitch on RPM, it able to perform action to the
specific outlet when following event or alarm triggers.
Events
1. UPS Load Overrun
4. UPS Battery Low
NetFeeler II (environmental sensor)
1. Temperature Overrun/
Underrun
4. Smoke

5.2.11.5 NetSwitch Setting

Select NetSwitch:
Address Change:
Note:
Identification:
Outlet:
Name:
Phone Controllable:
Control type:
Power off Delay:
Issued by: BT
Version no: 6.1
Date: March 2019
2. UPS Communication Lost
5. UPS Temperature Overun
2. Humidity
Overrun/Underrun
5. Gas
To select the NetSwitch
RPM could be daisy chain up to 16 units to control a total of
128 devices. Use this to assign a new number or change the
currently assigned number for the RPM unit. You have a choice
of 00 to 16.
You cannot choose a number that is already assigned to another
RPM.
To give a unique name for the RPM.
Indicate outlets A-H
To set a unique name for the Outlets
Option of "Yes" or "No"
Select between "Instant Shutdown"; Safe Reboot"; "Safe
Shutdown"
Sets the power off delay time in seconds (value from 0 to 9999)
BT UPS Enterprise SNMP Agent
3. AC Power Failed
6. When battery capacity
reaches to %
3. Water
6. Security (Door/ Windows
1~7)
Page 50 of 103