Appendix A - Update The Firmware Of Netagent Ups - BT NetAgent Series User Manual

9 Appendix A - Update the firmware of NetAgent UPS

NetAgent provides the following convenient methods for user to update the latest
firmware of the NetAgent
1. Click firmware upgrade under About of NetAgent webpage and it would link to
2. Use FTP to update (suitable for BK,CK,DK,BP,CP,DP using firmware version and
Issued by: BT
Version no: 6.1
Date: March 2019
Megatec's server to download the latest firmware. Then use Download Firmware
from Netility to upgrade it.
later)
The FTP is an easy and common way to upload the latest firmware into the
NetAgent. Please follow the instruction below to update the firmware. If there is
other FTP client application on your computer, that will also be fine to use it for
updating the firmware.
For example: if wish to update the latest firmware of the NetAgent UPS which IP
address is 192.168.50.179, then please operate with the steps below:
2.1. Enter Windows, then type ftp 192.168.50.179 under "Run" of the "Start
Menu"
2.2. After executed, the systems will requests for the user name and password.
Please enter "admin" under the user name and enter the password that was
been set at Netility under password. If did not set before, then please enter
the default value as user name: "admin" and nothing under password. (press
"Enter")
BT UPS Enterprise SNMP Agent
Page 93 of 103