Radius Server Settings; Enable Radius In Web/Telnet Login; Ip Filter; Ssl Public Key Information - BT NetAgent Series User Manual

Password
This section is to set a password for NetAgent web pages. Users have to input the password to get access
to NetAgent web pages from a browser.
Permission
This section is to set user's authorizations of Read or Read/Write.

IP Filter

This section is to set a particular IP address. Users can only gain access to NetAgent web pages if they
come from this IP address. If you want to manage NetAgent from any IP address, you can set it as *.*.*.*

5.2.12.2 RADIUS Server Settings

This is to configure the parameter of the radius server. Please refer to the appropriate
radius server setting
Only for NetAgent BT、CT、DT series and NetAgent 9 series of BX、CX、DX models

Enable RADIUS in Web/Telnet login

To select between Yes or No
RADIUS Server Address
To enter the IP address of the radius server
Authentication Port
To enter the UDP communication port number
Shared Key
This is to enter the password to login to radius server
Connection Timeout
Set the timeout for completion of RADIUS requests
Connection Retry
Set the number of retries for RADIUS requests.

5.2.12.3 SSL Public Key Information

This is to upload the SSL public key.
Only for NetAgent BT、CT、DT series and NetAgent 9 series of BX、CX、DX models
Issued by: BT
Version no: 6.1
Date: March 2019
BT UPS Enterprise SNMP Agent
Page 53 of 103