Table of Contents
Advertisement
Fig.25 Modem Status
5.2.1.7
3 Ports NetAgent could be connected to NetFeeler II to detect the environmental status.
NetFeeler II is to detect Temperature , Humidity and Water. It can receive signals from
wireless smoke sensors, gas sensors and security sensors to detect further environmental
conditions.
This page is to show details of the environment detected by NetFeeler II. Users could
choose an interval from the drop-down box to refresh the status. All settings can be set in
the Configuration/NetFeeler II page. The status will be displayed in red when NetFeeler II
detects an abnormal status condition. In addition, NetFeeler II will also set off an alarm for
notification.
NetFeeler II Status
This section is to show current temperature which is detected by NetFeeler II.
Environment Humidity
This section is to show current humidity which is detected by NetFeeler II.(shown as%)
Water Status
This section is to show water presence (ie. flood)which is detected by NetFeeler II.
Gas Status
This section is to show gas presence which detected by gas sensor. When leakage of gas
detected, sensor would beep and stops only when gas vanish.
Smoke Status
This section is to show smoke presence (ie. fire) which is detected by smoke sensors.
Security Status (Security1 ~ Security7)
Issued by: BT
Version no: 6.1
Date: March 2019
Environment Sensors-NetFeeler II
BT UPS Enterprise SNMP Agent
Page 34 of 103
Hide quick links:
Advertisement
Table of Contents
