Netagent Ups Installation - BT NetAgent Series User Manual

2 NetAgent UPS Installation

Before using the NetAgent, the proper hardware and software configuration is necessary.
Hardware installation is to connect the NetAgent and UPS and network. Software
configuration includes the IP address. Firmware upgrade. Or using the Browser or Telnet for
configuration.
You could also install the shutdown utility – ClientMate to protect your Windows operating
system. And also could use the UPS management software – SNMPView, to control and
management multiple UPS on the network.
Issued by: BT
Version no: 6.1
Date: March 2019
Connect the NetAgent, UPS
and Network (Chapter 3)
Setup the NetAgent IP address or
update firmware by using
Netility (Chapter 4)
Using the Brower to connect to
NetAgent by using the IP address of
it. (Chapter 5)
Using the shutdown utility
– ClientMate to
connect to NetAgent UPS
(Chapter 7)
Fig.4 NetAgent UPS installation flowchart
Using the Telnet to configure
the NetAgent UPS settings
(Chapter 6)
The NetAgent management utility –
SNMPView could be used
to manage multiple NetAgent
(Chapter 8)
BT UPS Enterprise SNMP Agent
Page 18 of 103