Set E-Mail; Telnet Configuration - BT NetAgent Series User Manual

6.2.9
This allows to set e-mail accounts to receive power event notification for emergency
management.
a. Reset Configuration to Default.
b. Save & Reboot.
c. Exit Without Saving.

6.3 Telnet Configuration

Use Putty software to configure SSH Telnet encryption on NetAgent 9.
This only apply to NetAgent 9 models of CX, DX and BX (Refer to page 19 to enavle SSH
port of 22).
Following is the configuration of SSH Telnet
•
•
Issued by: BT
Version no: 6.1
Date: March 2019

Set E-mail.

Set all values to their default settings.
Save the current configuration data, including any changes you have made, and reboot
the Net Agent.
Exit, all configuration changes will be lost.
Enter the IP address of NetAgent 9 and click on Enter
Enter the username / password
BT UPS Enterprise SNMP Agent
Page 67 of 103