Power Failure; Scheduled Shutdown - BT NetAgent Series User Manual

(S): The UPSilon2000 or RUPS2000 Host
SNMP Port and Community Name (For NetAgent only)
The community name and SNMP port must be the same as configured on NetAgent.
Default SNMP Port is 161
Broadcast Warning Messages (On Server platform only)
To configure if sending the warning messages when power failed (only for WinNT, Win2000
and XP server operating system)
Configuration Password
To set if password is require to be entered when effect any new setting on ClientMate. If
lost of password, just re-install the ClientMate.
7.2.1.2
Use Windows ACPI Interface
To shutdown the server via Windows ACPI
Shutdown Windows
To configure if shutdown or Sleep the Windows system when power failure.
When AC failed, commence computer shutdown sequence in xx Min.
To configure the time delay between the AC failure and the system shutdown.
When Battery Low, commence computer shutdown sequence in xx Min.
To configure the time delay between the Battery Low and system shutdown.
When Bettery capacity reaches to X %
To configure to shutdown when battery capacity meets at _ %
Auto save application files
Check if to save the application files before system shutdown
Run Application before shutdown computer
Execute the application before system shutdown.
Turn Off UPS (For NetAgent Only)
Setting if to turn-off UPS power after system shutdown.
7.2.1.3
Shutdown Windows
To configure if shutdown or Sleep the Windows system
Notify Scheduled shutdown before xx Min.
Time before the 'Schedule Shutdown' to make notification
Auto save application files
Check if to save the application files before system shutdown
Run Application before shutdown computer
Issued by: BT
Version no: 6.1
Date: March 2019

Power Failure

Scheduled Shutdown

BT UPS Enterprise SNMP Agent
Page 71 of 103