Sent Information; Received Information; Save/Restore Settings - BT NetAgent Series User Manual

If Debug mode is set as manually, user may enter its parameter under Send Contents
column.

Sent Information

This column shows the real time sent command

Received Information

This display the response that NetAgent receives from UPS
Fig.56 Serial ports debug
5.4.3
This to help to illustrate the operation of NetAgent
5.4.4
5.4.4.1
This to check Netagent's Firmware/Hardware version and serial number
5.4.4.2
Click Save to save the configuration to your PC.
format of YYYY_MMDD_####.cfg. Administrator permission required.
Restore previous configuration
Use this function to restore a *.cfg configuration that has been saved earlier. Click Browse...
to the location of the file and click Restore.
Issued by: BT
Version no: 6.1
Date: March 2019
Help
About
About

Save/Restore Settings

BT UPS Enterprise SNMP Agent
The text file will have a default
Page 63 of 103