Set Ip Address; Set Snmp Mib System; Set Snmp Access Control; Set Snmp Trap Notification - BT NetAgent Series User Manual

•
Fig.61 NetAgent Telnet window
6.2.1
This function allows you to setup IP Address, Gateway Address, Subnet Mask parameters.
6.2.2
This function allows you to set the MIB system group parameters.
6.2.3
This function allows you to set the Manager IP, Community, Access Permission.
6.2.4
If you want to use a PC and perform the 'Trap' function of SNMP manager to manage UPS
through Net Agent, the IP address of the PC must be added in this list of Net Agent.
6.2.5
This allows you to setup the Communication Type of UPS, UPS Device Name and Battery
Replacement Date.
6.2.6
This allows you to setup the System Name, Rating which connected., Connected.
6.2.7
This allows you to setup the System date, time and two time servers.
6.2.8
This is allows to set users account's authority.
Issued by: BT
Version no: 6.1
Date: March 2019
Main screen is as follows:

Set IP Address.

Set SNMP MIB System.

Set SNMP Access Control.

Set SNMP Trap Notification.

Set UPS Properties.
Set UPS Devices Connected.
Set System Time & Time Server.
Set Web and Telnet User Account.
BT UPS Enterprise SNMP Agent
Page 66 of 103