7 ClientMate - Windows Shutdown Utility
ClientMate is a utility for connecting to NetAgent. This utility is for the Windows platform.
When the ClientMate get the power failure signal from the NetAgent. The ClientMate will
save the files and shutdown the system gracefully. When the hardware installation of the
NetAgent has been completed, you could install the ClientMate on any of the Windows
system on the network. When the ClientMate detects the AC Fail, Battery Low, Schedule
Shutdown signals from the NetAgent, it will save the file and shutdown the system. Please
check the operation description here below.
7.1 Install ClientMate
•
•
Fig.62 ClientMate Group
•
7.2 Using ClientMate
Please find the ClientMate main window here below: press the left icon to enter the
configuration dialog. On the right of the window is the current status of the UPS.
Issued by: BT
Version no: 6.1
Date: March 2019
Put the NetAgent Utility CD into the CD driver. And execute the "ClientMate"
program.
After complete installation, there will be a 'ClientMate' group in the Windows
Start group.
Click "ClientMate" to initiate the ClientMate and start using the ClientMate.
BT UPS Enterprise SNMP Agent
Page 69 of 103