BT NetAgent Series User Manual page 22

Click Launch Device or double click the NetAgent listed in the table to launch it.
Enter the Account (Login Name) and Password (Login Password) set earlier to
login. If you did not configure one, then just click Apply to login.
•
Choose the NetAgent from the right of the screen, then click "Configure", would
shows the following setting page.
IP Address: Set IP address for Netagent UPS
When use at the first time, please set IP address; subnet mask; and gateway. After setting,
enter IP address from Telnet or Browser to connect to NetAgent's website.
Fig.8 Netility Configure
When using DHCP or BOOTTP to set up IP address, IP address, Subnet Mask and Gateway would receive
directly by the system.
Fig.8 Netility : Set IP address for NetAgent UPS
Advanced:Advanced Netagent UPS Setting
In order to ensure the secure management of UPS, Netility provides two protecting
function:
Management Protocol
Issued by: BT
Version no: 6.1
Date: March 2019
Network Settings
BT UPS Enterprise SNMP Agent
Page 22 of 103