Click on information → System Status, under Wireless Status, it displays the IP address of
the wireless network
Fig.32 NetAgent 9 Wireles
5.2.7
This page is to set NetAgent SNMP settings so it can be used by an NMS (Network
Management System). (Eg: SNMPView, SNMPView can be found on the NetAgent Utility
CD.)
5.2.7.1
System Name
This section is to give a name to a NetAgent.
System Contact
This section is to give a name to the administrator.
System Location
This section is to set NetAgent location.
5.2.7.2
Manager IP Address
This section is to set the IP address that the administrator can manage NetAgent from. It is
valid for up to 8 IP addresses. To manage NetAgent from any IP address, enter *.*.*.* into
Manager IP address.
Version
This is to select between SNMPv1& SNMPv2 or SNMPv3 (SNMPv3 only applies to NetAgent
9 series)
Issued by: BT
Version no: 6.1
Date: March 2019
SNMP
MIB System
Access Control
BT UPS Enterprise SNMP Agent
Page 42 of 103