Snmpview - Windows Based Ups Management System; System Requirements; Install Snmpview; Introduction - BT NetAgent Series User Manual

8 SNMPView – Windows Based UPS Management

8.1 Introduction

SNMPView is a software to remotely monitor and control multiple UPS connected to a
network. When an event occurs, SNMPView can be programmed to send an email or a
pager to inform the designated network manager. It can also inform the user of the UPS
current condition or configuration, perform self-test, send a history file, turn the UPS
On/Off and more.
SNMPView features;
•
•
•
•
•
•
•
•
•

8.2 System Requirements

•
•
•
•

8.3 Install SNMPView

•
•
Issued by: BT
Version no: 6.1
Date: March 2019
System
A windows interface that is simple and user friendly.
Automatic detection and identification of any UPS with NetAgent II or NetAgent
Mini connected to a network.
Capable of simultaneously monitoring up to 1,000 UPS.
Remotely control, monitor, and manage the networked UPS (Turn On/Off, Self-
test, etc...)
Able to simultaneously support both RS-232 Interface (1 or 3 phase) and Contact
Closure Interface UPS.
UPS condition displayed in either a graphic or analog bar chart.
Supports MegaTec's SNMP Agent and SNMP Internal Card.
Able to send email for notification
Able to send SMS for notification
LAN/WAN network system with TCP/IP
RS-232 Interface or Contact Closure Interface UPS
External SNMP Agent or SNMP Internal Card
Microsoft Windows 95, 98, NT, 2000, XP, Me, 2003,2008,Vista,7
Put the NetAgent Utility CD into the CD driver. And execute the SNMPView
program.
After installation, there will be a NetAgent group in the Windows Start group.
BT UPS Enterprise SNMP Agent
Page 75 of 103