System Status; System Information; Network Status; Basic Information - BT NetAgent Series User Manual

•
•
•
Note: The options available on this menu depend on the NetAgent model. (e.g. "NetFeeler
II" will not be display for one port.)
5.2.1.1
This page is to show NetAgent system information and Network settings. Values shown
here are either provided by NetAgent itself or they are user settings from the Configuration
pages.

System Information

This section is to show NetAgent system information. Values in Hardware Version/Firmware
Version/Serial Number/System Time, are provided by NetAgent itself. Other values are user
settings from the Configuration pages.

Network Status

This section is to show NetAgent Network settings. The MAC address is provided by
NetAgent. All other values in this section are user settings from the Configuration pages.
Fig.18 System Status
5.2.1.2
This page is to show UPS basic information. Values here are either provided by the UPS or
they are user settings from the Configuration pages.
Issued by: BT
Version no: 6.1
Date: March 2019
Meter/Chart
Modem Status
Environment Sensors-NetFeeler II

System Status

Basic Information

BT UPS Enterprise SNMP Agent
Page 29 of 103