Specifictions; Basic Specifications - Sharp MX-FN23 Service Manual

[2] SPECIFICTIONS

1. Basic specifications

(1) Basic specifications
Model name
Name
Type
Paper transport reference
Loading method
Mode
Power consumption
Power source
Dimensions (W x D x H mm)
Occupying size
Weight
Stacker section
Offset quantity
Stacking Non-sort
capability
Offset
Staple alignment (Shift in a job)
Paper exit Non-staple
storage capacity mode
Stapling mode
Paper empty detection
Paper delivery tray full detection
Staple section
Binding position
Binding quantity
Staple loading method
Staple empty detection
Manual staple mode
*1: China only
MX-FN23
Finisher
Built-in type
Center reference
Lifting method offset tray
Non-sort offset sort, staple sort
About 49W
Supplied from the main unit
472 x 461 x 199mm (When the paper delivery tray is extended: Width 619mm)
Conforms to the main unit.
13.0kg (including the connection unit, excluding the second paper delivery unit.)
30mm
Bottom direction (Y) : 25mm or less
Paper exit direction (X) : 25mm or less
Bottom direction (Y) : 25mm or less
Paper exit direction (X) : 25mm or less
X,Y : 2.5mm
250 sheets or 35.5mm or less (A3, B4, 11 x 17, 8.5 x 14, 8.5 x 13, 8K*)
500 sheets or 71mm or less (A4, A4R, B5, B5R, 8.5 x 11, 8.5 x 11R, 16K*, 16KR*)
*: 8K, 16K, and 16KR are valid only for China.
100 sheets or 35.5mm or less (A5, A5R, 5.5 x 8.5, 5.5 x 8.5R, B6R, Postcard, OHP, Label sheet, Envelope (20 sheets))
Note: Offset is disabled for Postcard, OHP, Label, Tab paper and Envelope.
30 section, or 250 sheets, or 35.5mm or less (fixed size paper greater than A4R) (Documents in mixed sizes with the same
width)
30 section, or 500 sheets, or 71mm or less (fixed size paper smaller than A4R)
Note: Stapling heavy paper is only available for front and back cover.
YES
YES
Rear one position binding
50 sheets (A4, A4R, B5, B5R, 8.5 x 11, 8.5 x 11R, 16K*1, 16KR*1)
30 sheets (A3, B4, 11 x 17, 8.5 x 14, 8.5 x 13, 8K*1)
Mixed load (same width) stapling: 30 sheets
Staple cartridge (5000 staples) (MX-SCX1)
YES
NO
MX-FN23 SPECIFICTIONS 2 – 1