Paper Entry, Alignment, Staple - Sharp MX-FN23 Service Manual

B. Main PWB cover
1) Remove the screw, and remove the main PWB cover.
C. Front cabinet
1) Remove the screw, and remove the separation lever. Remove
the screw, and remove the front cabinet.
D. Rear cabinet
1) Remove the screw, and remove the rear cabinet.
E. Paper entry paper guide unit
1) Remove the screw, and remove the paper entry paper guide
unit.
F. Upper paper guide
1)

2. Paper entry, alignment, staple

A. Staple cartridge
1)
2)
3)
NOTE: When installing the staple case, push it until it locks.
MX-FN23 DISASSEMBLY AND ASSEMBLY 8 – 2
Remove the screw, and remove the upper paper guide.
Open the front cover.
Turn the separation lever to the left to separate the finisher
from the machine.
Pull the lever of the staple case to remove the staple case.