Flow Connections To The Module; Installing The Module Flow Connections To The Module - Agilent Technologies 1260 Infinity User Manual

3
Installing the Module

Flow Connections to the Module

Flow Connections to the Module

Tools required Two wrenches 1/4 – 5/16 inch for capillary connections
Parts required #
G1321-68755
Preparations Detector is installed in the LC system.
Toxic, flammable and hazardous solvents, samples and reagents
WA R N I N G
The handling of solvents, samples and reagents can hold health and safety risks.
➔
➔
➔
The flow cell is shipped with a filling of isopropanol (also recommended when the
N O T E
instrument and/or flow cell is shipped to another location). This is to avoid breakage due to
subambient conditions.
64
Description
Accessory kit
When working with these substances observe appropriate safety procedures (for
example by wearing goggles, safety gloves and protective clothing) as described in
the material handling and safety data sheet supplied by the vendor and follow good
laboratory practice.
The amount of substances should be reduced to the minimal volume required for
the analysis.
Do not operate the instrument in an explosive atmosphere.
Agilent 1260 FLD User Manual