Getting Started and Checkout
This chapter describes the check out of the Agilent 1260 Infinity Fluorescence
Detector using the Agilent isocratic checkout sample.
Starting Your Detector
When
If you want to checkout the detector
Parts required
#
1
1
1
2
1
Hardware required
LC system with FLD
1 Turn ON the detector.
2 Turn ON the lamp.
3 You are now ready to change the settings of your detector.
Agilent 1260 FLD User Manual
p/n
Description
5063-6528
Start-up Kit, includes
LC cartridge Hypersil ODS, 5 µm, 125 x 4 mm with CIS cartridge holder
01080-68704
Agilent isocratic checkout sample
0100-1516
Fittings
5021-1817
Capillary, 150 mm long, 0.17 mm i.d.
When the lamp is turned on the first time the instrument performs some
internal checks and a calibration check which takes about 5 minutes.
Using the Fluorescence Detector
Getting Started and Checkout
4
71