Flow Connections
Tools required
¼ inch wrench
Parts required
#
1
1
Hardware required
Other modules
Preparations
• Detector is installed in the LC system.
Toxic, flammable and hazardous solvents, samples and reagents
WA R N I N G
The handling of solvents, samples and reagents can hold health and safety risks.
➔
➔
➔
The flow cell is shipped with a filling of isopropanol (also recommended when the
N O T E
instrument and/or flow cell is shipped to another location). This is to avoid breakage due to
subambient conditions.
Agilent 1260 Infinity RID User Manual
p/n
Description
G1362-68706
Interface tubing kit
G1362-87300
Interfacing capillary
When working with these substances observe appropriate safety procedures (for
example by wearing goggles, safety gloves and protective clothing) as described in
the material handling and safety data sheet supplied by the vendor and follow good
laboratory practice.
The amount of substances should be reduced to the minimal volume required for
the analysis.
Do not operate the instrument in an explosive atmosphere.
Installing the Refractive Index Detector
Flow Connections
3
59