Keysight CXA N9000A Installation Note page 14

Signal analyzer option pc3 single core high performance processor

Hide thumbs Also See for CXA N9000A:

Option PC3 - Single Core High Performance Processor Upgrade Kit

Save Changes

1. Press "F10" on the keyboard to save changes.

2. Press the

key on the external keyboard to confirm the BIOS configuration changes as per

Enter

Figure

Figure 9

Confirm BIOS Configuration

3. After the BIOS changes are saved, the instrument will reboot and wait for further configuration at

the boot screen shown in

installation procedure.

Figure

9. When this is seen proceed onto the next section of this

Installation Note

N9000-90030

Table of Contents