Keysight CXA N9000A Installation Note page 8

Signal analyzer option pc3 single core high performance processor

Hide thumbs Also See for CXA N9000A:

Option PC3 - Single Core High Performance Processor Upgrade Kit

Replacement

1. Refer to

Figure

3. With the ejectors pulled out, slide the new CPU assembly into the slot at the rear

of the instrument and push on the assembly to mate the connectors to the midplane assembly.

Secure the board with the ejectors.

2. Replace the six screws (1) that attach the CPU assembly to the chassis. Torque to 9 inch-pounds.

Figure 3

CPU Assembly Installation

Installation Note

N9000-90030

Table of Contents