LifeSpan SM-800 User Manual page 12

20
10
52 5
STEP 3
Assemble Handlebar/Computer
1. Fix the Handlebar (pt.20) on the Handlebar Post (pt.19) with 6pcs of Bolt (pt.10) and 6pcs of Washer
(pt.52) and 6pcs of Flat Washer (pt.5).
2. Insert the Handlebar Post (pt.19) into the Main Frame, adjust it at a expect height, then lock the
adjustment knob (pt.14) into the nut on the Main Frame. Please make sure that the knob pin inserts
into the Handlebar Post hole.
3. Lock the Computer (pt.76) on the Handlebar (pt.20) with 4pcs of Bolt (pt.77), then connect A1 and A2
together.
12 | ASSEMBLY INSTRUCTIONS
76
A1
77
5 52
10
A2 19
14
A1
Gap
ATTENTION:
Connected with the computer line, to
Gap(A1) corresponding to the Convex
Point (A2) to insert link.
Convex point
A2