Husqvarna Automower 310 Technical Manual page 46

4. AUTOCHECK EXPERIENCE, SERVICE PROGRAM
If the text Connected mower: None is
displayed in the lower bar in Autocheck
EXP, contact with the mower has not been
established. If this is the case, check the
following:
• Check that cable is correctly connected both
in the computer and in the mower.
• The mower is on, i.e. main switch in position 1
and that the start page is visible.
• Make sure that G3 is selected in the
program's bottom left corner.
• If you alternate between mowers from
Generation 2 and Generation 3, the
channel for the respective family of mowers
must be selected. When connecting e.g.
Automower
R100LiC,R130Li, R130LiC, R160Li, the G3
channel must therefore be selected.
IMPORTANT INFORMATION
Remember to refit the protective cover on
the service outlet on the mower once work
has been completed.
Autocheck EXP is shutdown by selecting Exit under
File or by clicking on the cross in the upper right corner
of the window.
English - 46
TH_1158203_310_315_GARDENA_US.indd 46
310/315 or GARDENA R100Li,
®
2016-05-11 10:16:12