Husqvarna Automower 310 Technical Manual page 52

4. AUTOCHECK EXPERIENCE, SERVICE PROGRAM
Note! Autocheck EXP saves the mower automatically
to the log book as soon as the mower is connected
to the program. No manual saving is needed and
is consequently never carried out.
In those cases where something is altered while the
mower is connected to Autocheck EXP, an additional
save to the log book is carried out when the mower
is disconnected or when Autocheck EXP is turned off.
A maximum of two automatic saves are implemented
per date on an individual mower.
4.3.6 Tools
Under the Tools section you will find a number
of important special settings. Actions that can be
undertaken from this menu include:
• Clear the mower's list of fault messages
• Restore the mower to factory settings
• Clear the battery's charging cycle counter
(recommended when replacing the mower's
battery)
• Transfer user settings from log book to new
main circuit board
• Reading the mower's encrypted PIN code,
the so-called security code
• Transfer PC time to the mower
• Test the battery's capacity
4.3.7 The Assistant
The Assistant is found in the program's bottom right-
hand corner. It provides information about the status
of both Autocheck EXP and the connected mower.
The Assistant can also propose actions.
Tips! Always follow the recommendations from
the Assistant. If the Assistant detects a problem it
frequently also has one or several suggested actions.
English - 52
TH_1158203_310_315_GARDENA_US.indd 52 2016-05-11 10:16:14