New Loop Signal - Husqvarna Automower 310 Technical Manual

3. INSTALLATION

3.10 New loop signal

The PIN code in the robotic lawnmower is simply an
anti-theft function to prevent unauthorized people from
using the mower. It does not affect the loop signal in
any way, which the PIN code in Husqvarna G2 models
does.
In rare cases, there may be a reason to change the
loop signal, for example, if two nearby installations
have the same loop signal, thereby interfering with
each other. An option exists to generate a randomly
selected new loop signal via the Security - Advanced -
New loop signal menu.
This also needs to be carried out every time the robotic
lawnmower is placed in another charging station.
Bear in mind that a new loop signal also has to be
generated when the mower returns to its ordinary
charging station, for example after service if another
charging station other than the customer's has been
used. See 3.6 One robotic lawnmower for several
working areas on page 41.
English - 43
TH_1158203_310_315_GARDENA_US.indd 43 2016-05-11 10:16:12