I/O States - Infineon Cypress WICED CYW43903 Manual

12. I/O States

Table 12 provides I/O state information for the signals listed.
The following notations are used in
I: Input signal
■
O: Output signal
■
I/O: Input/Output signal
■
PU = Pulled up
■
PD = Pulled down
■
NoPull = Neither pulled up nor pulled down
■
Table 12. I/O States
Ball Name I/O Keeper
HIB_REG_ON_IN I N
REG_ON I N
GPIO_0 I/O Y
GPIO_1 I/O Y
GPIO_2 I/O Y
GPIO_3 I/O Y
GPIO_4 I/O Y
GPIO_5 I/O Y
Document Number: 002-14826 Rev. *G
Table 12:
1
Active Mode
Input; PD (Pull-down can be
disabled.)
Input; PD (Pull-down can be
disabled.)
Input/Output; PU, PD, or
NoPull (programmable
[Default: PD])
Input/Output; PU, PD, or
NoPull (programmable
[Default: NoPull])
Input/Output; PU, PD, or
NoPull (programmable
[Default: NoPull])
Input/Output; PU, PD, or
NoPull (programmable
[Default: PD])
Input/Output; PU, PD, or
NoPull (programmable
[Default: NoPull])
Input/Output; PU, PD, or
NoPull (programmable
[Default: PD])
PRELIMINARY
Low Power State/Sleep (All
Power Present)
Input; PD (Pull-down can be
disabled.)
Input; PD (Pull-down can be
disabled.)
Input/Output; PU, PD, or NoPull
(programmable [Default: PD])
Input/Output; PU, PD, or NoPull
(programmable [Default:
NoPull])
Input/Output; PU, PD, or NoPull
(programmable [Default:
NoPull])
Input/Output; PU, PD, or NoPull
(programmable [Default: PD])
Input/Output; PU, PD, or NoPull
(programmable [Default:
NoPull])
Input/Output; PU, PD, or NoPull
(programmable [Default: PD])
Out-of-Reset; Before
2
Power-down Software Download
(REG_ON Held Low) (REG_ON High)
Input Input
Input; PD (of 200 kΩ) Input; PD (of 200 kΩ)
High-Z, NoPull Input; PD
High-Z, NoPull Input; NoPull
High-Z, NoPull Input; NoPull
High-Z, NoPull Input; PD
High-Z, NoPull Input; NoPull
High-Z, NoPull Input; PD
CYW43903
Power Rail
–
–
VDDIO
VDDIO
VDDIO
VDDIO
VDDIO
VDDIO
Page 38 of 65