Beckhoff EL6692 Documentation page 114

Ethercat bridge terminal

Table of Contents

Commissioning

• Execute "Get configuration" on the secondary side; see the fig. "Get configuration" on the secondary

side. The process data configured on the primary side are generated accordingly in the configuration

tree.

Fig. 140: "Create configuration" on the primary side

Fig. 141: "Get configuration" on the secondary side

The CoE folders of both halves of the EL6692 are used to save the process data configuration in the

EL6692. The types and complexity of the definable process data are therefore limited. If the notes from the

fig. "Get configuration" on the secondary side are displayed during the "Create Configuration" procedure, the

114

Version: 3.2

EL6692

Table of Contents

Chapters

Table of Contents