Gerber Technology AccuPlot AP-100 User Manual page 55

Offline Operation
7. Press F3-Toggle to turn the jet on or off.
8. Press F1 to move to the next jet. (Press F2 to move to the previous jet.)
9. Repeat steps 6 through 8 for each jet to be tested.
10. After you have chosen the jets you are going to test, press F4 to return to
the first Test Jets menu.
11. Press F3-Fire to test the selected jets.
12. Press F4 to return to page two of the Inkjet Diags menu.
Diagnostic Tests
NEXT JET
PREV JET
TOGGLE
SET JETS
TEST JETS
####
TEST JETS
####
TOGGLE
EXIT
FIRE
EXIT
4-35