Spectrum Controls Micro800 2085-IT8-SC User Manual page 12

1-4 Chapter 1, Module Overview
Input Specifications
Operating Temperature
Storage/Non-Operating
Temperature
Operating Humidity
Storage/Non-Operating
Humidity
Vibration/Operating
Operating Shock
Storage/Non-Operating
Shock
Pollution Level
ESD
Radiated Immunity
Input modes
Inputs per module (8
channels)
Inputs per module (16
channels)
Thermocouple types
Voltage input ranges
Input filters
Thermocouple accuracy
Specifications only apply to 4
Hz and 17 Hz filters
Type J (-210C to 1200C)
Type N -100C to 1300C)
Type N (-210C to -100C)
Type T -170C to 400C)
Type T (-270C to -170C)
Type K (-170C to 1370C)
User's Manual Pub. 0300322-01 Rev. A
Table 1-1. Input/Performance/Environmental Requirements
-20 ºC to 65 ºC (-4 ºF to 149 ºF)
-40 ºC to 85 ºC (-40 ºF to 185 ºF)
5% to 95%, non-condensing
5% to 85%, non-condensing
10 Hz to 500 Hz, 2 G, 0.030 max peak-to-peak
25 G, peak acceleration, 11±1 ms pulse, half sine
25 G peak acceleration, 11±1 ms pulse, half sine; 35 g for
panel mount.
Meets Pollution Degree 2 requirements.
6kV Indirect (Coupling Plate)
6kV Contact Discharge (to points of initial contact)
8kV Air Discharge (to points of initial contact)
10 V/M with 200 Hz square-wave 50% Pulse 100% AM at
900 and at 1890 MHz
10 V/M with 1 kHz sine-wave 80% AM from 80...2000
MHz
3 V/M with 1 kHz sine-wave 80% AM from 2000...6000
MHz
Thermocouples and millivolt ranges.
8 thermocouple/ millivolt inputs, and 2 CJC input channels
16 thermocouples/ millivolt inputs, and 2 CJC input channels
J, K, T, E, R, S, B, N and C
±50 mV and ±100 mV
4 Hz, 17 Hz, 60 Hz, 470 Hz
Error at 25 C, Typical,
Max
±0.4 C, ±0.6 C
±0.4 C, ±0.7C
±0.8 C, ±1.5C
±0.6 C, ±1.0 C
±3.0 C, ±8.0 C
±1.1 C, ±1.5 C
Value
Error over -20 C to 65 C
Typical, Max
±0.5 C, ±1.6 C
±0.5 C, ±1.3 C
±1.0 C, ±2.2 C
±0.7 C, ±1.5 C
±.5 C, ±14.0 C
±1.2 C, ± 2.1 C