Bout This Guide; Olycom Model Numbers - Polycom SpectraLink 6000 System Facility Preparation

About this Guide
Polycom Model Numbers
Related Documents
PN: 1725-36096-001_J.doc
This document describes the installation procedure for the
SpectraLink 6000 System with a SpectraLink 6100 Master Control Unit
(MCU). The procedures described in this manual are those that take
place after the installation-planning procedure. You should already
know the equipment requirements and installation locations. For
example, you should know where each Base Station and the MCU
will be installed.
This document covers the following registered model numbers:
SCA416, SCA408, SCA516, SCC408, SCC416, SCD408, SCD416,
SCE408, SCE416, SCF4089, SCF416, SCI408, SCI416, SCJ408, SCJ416,
SCK408, SCK416, SCL408, SCL416, SCM408, SCM416, SCN408,
SCN416, SCO408, SCO416, SCS416, SCT416, SCX416, RCC400,
RCO400, RCU100, RCU200, RCU201, MOG400
SpectraLink 6100 MCU: Installation and Operation (1725-36097-001)
SpectraLink 6100 MCU: Quick Reference (1725-36098-001)
SpectraLink 6100 MCU: Open Application Interface (OAI) Gateway
Installation and Operation (1725-36120-001)
Installing the Outdoor Base Station (1725-36127-001)
Available at
h ttp://www.polycom.com/support/voice/proprietary_wireless/ind
1 1
ex.html
3