Equired Materials Provided By Customer - Polycom SpectraLink 6000 System Facility Preparation

SpectraLink 6100 MCU: Facility Preparation: SpectraLink 6000 System
Required Materials Provided by Customer
14
Outlet Strip Recommended for installations with more than one
MCU. This will allow the MCUs to be turned on and off together.
Cross-Connect Block Required to connect the PBX ports and the
Base Stations to the MCU.
25 Pair Cables RJ-21 male at MCU end, required to connect the
MCU to the cross-connect blocks.
Backboard space The MCU is designed to be wall mounted to
3/4" plywood securely screwed to the wall.
Quick Clip Fuse Required with an RCO410 Outdoor Base Station
or when a Base Station is located in a separate building from the
SpectraLink 6100 MCU. Recommended Quick Clip Fuse is
available from Illinois Tool Works, Linx Division, Model # SCP-
2X2.
Mounting Hardware If the Base Stations will be mounted on
finished walls or ceilings, 4 to 5" long 1/4" bolts, nuts, and
washers are required for each Base Station mounted.
PN: 1725-36096-001_J.doc