Trouble Shooting Guide - Schulte SRW800 Operator’s Manual With Parts Listing

14. TROUBLE SHOOTING GUIDE (WINDROWER)
TROUBLE
Excessive Vibrations
Gear Box Overheating
Gear Box Noisy
Noise
SRW800 07/03
© 2003 Alamo Group Inc.
OPERATION
POSSIBLE CAUSE
1. Check gear box bolts.
2. Drivelines not phased cor-
rectly. Implement & Tractor
yokes must be in line.
1. Low on lubricant.
2. Improper type lubricant.
3. Excessive trash build-up
around gear box.
1. Rough Gears.
2. Worn Bearing
1. Rough Gears.
1. Damaged Chain Shield
2. Worn Bearing or Gear
Operation Section 4-35
POSSIBLE REMEDY
Tighten if loose.
Replace driveline.
Fill To Level Plug
Replace with proper lubricant.
Remove trash.
Run in or change gears.
Replace bearing
Run in or change gears.
Straighten or replace Shields.
Replace Bearing or Gear