Schulte SRW800 Operator’s Manual With Parts Listing page 24

Your SRW800 is designed to windrow 2" to 25" rocks . The SRW800 windrower can also be used for reclaiming
gravel from road sides. Check local regulations before operating on road ways. With proper maintenance as
described in this manual, your SRW800 windrower will provide you with years of dependable service with a
minimum of repairs.
It is required that all operators of this implement read this manual or be instructed of its contents as to safety,
proper operation, and maintenance before beginning operation.
Your windrower has been assembled for operation with a tractor PTO input speed of 540 RPM.
When ordering replacement parts for the Gearboxes and the Drivelines, be sure to specify the serial number. The
serial number is located on the right hand side attached to the SRW800 3-point hitch.
Driveline Integral Shields, and Gearbox Shields are standard equipment and are to be used at all times.
To place the warranty into effect, fill out the warranty card in full, giving all the requested information, and mail
promptly. Be sure to give the serial number of the SRW800.
SRW800 07/03
© 2003 Alamo Group Inc.
INTRODUCTION
Introduction Section 2-2