General - Schulte SRW800 Operator’s Manual With Parts Listing

General

IMPORTANT: Check oil level in all gearboxes before operation. Refer to the 'Lubrication' section of
this manual for recommended oil type and viscosity.
Lubricate all grease fittings. Refer to the grease schedule in this manual.
Check that all nuts and bolts are in place and properly tightened. Refer to the 'Maintenance' section of
this manual for required bolt grades and torques.
Check that all tires are inflated to proper specifications. Refer to the 'Maintenance' section of this
manual for required tire pressures.
PRE CUSTOMER DELIVERY CHECKLIST
1. Is oil level in the gearboxes to correct level?
2. Has the proper oil been used in the Gearboxes?
3. Are the Tires clear of the Mainframe, even when turning during axle articulation?
4. Are all hoses tight and do not leak?
5. Are all decals in place? See manual for decal description and placement.
6. Are all bolts tight?
7. Have all hoses been properly routed so that hoses do not kink or bind when windrower is
articulated through all motions?
8. Is machine equipped with proper operator protection?
9. Is drum rotation correct? Are teeth hard surfaced?
10. Does implement operate smoothly at normal operating speed? Implement should not
vibrate excessively.
SRW800 07/03
© 2003 Alamo Group Inc.
ASSEMBLY
Assembly Section 3-4