Transducer Calibration Menu; Calibration; Fig. 11-8: Transducer Calibration Menu - Addi-Data APCI-3701 Technical Description

APCI-3701

11.6.1 Transducer calibration menu

Starte the calibration
Starts the next
calibration action

11.6.2 Calibration

For the calibrationn you need a PX 3701-Box and the cable ST3701. Connect the
box to the APCI-3701 via the cable. After having selected the transducer type that
you want to calibrate, the calibration position and the channels of group 1 and
group 2 to which the transducers are connected, click on "Start calibration". Each
step in progress is indicated by a pointer and the text colour that changes to green.
Each step in waiting status is indicated blinking text colour that changes to
red/white.
The first calibration step is the board calibration. Therefore, no manipulation of
the user is needed.

Fig. 11-8: Transducer calibration menu

Break the calibration
Transducer calibration help
SET3701: Calibration and update tool
63