Addi-Data APCI-3701 Technical Description page 2

Solutions for industrial automation and measurement
___________________________________________________________________________________________________
Because of the migration to RoHS-compliant products the board APCI-3701 has
been revised.
Thus, do observe the following changes:
1. Software update SET3701
i WICHTIG!
Because of the migration to RoHS-compliant
ADDI-DATA products, the board APCI-3701 has been
revised. Thus, it is necessary to update the software!
Please observe that you must use the calibration and update tool SET3701 from
version 3030-1006 for the new board. Please find the current version of SET3701 on
the delivered CD.
If you replace an old board by a new APCI-3701:
Uninstall the old version of SET3701 and install the new version of SET3701.
2. Diagnostic function
After the calibration of the board, it is possible to detect with the Primary Open Circuit
Test if no transducer is connected.
ADDI-DATA GmbH • Dieselstr. 3 • D-77833 Ottersweier • Phone +49(0)72 23 / 94 93-0 • Fax: +49(0)72 23 / 94 93-92
E-Mail: info@addi-data.com
The photo shows a
new APCI-3701.
• Internet: www.addi-data.com