Review Results - 3M Clean-Trace NGi Luminometer User Manual

The list of sample plans stored on the 3M™ Clean-Trace™ NGi Luminometer will be
displayed. Use the navigation (▲/▼) buttons to highlight the plan to be reviewed and
press Select.
Use the navigation (▲/▼) buttons to highlight the required result set to review and
press Select.
The following symbols will appear against existing Result Sets:
Measurements have been taken against all Test Points in the Sample Plan.
Measurements have been taken against some Test Points in the Sample Plan. These measurements will NOT be uploaded the next time
the NGi Luminometer is Synchronised.
Measurements have been taken against some Test Points in the Sample Plan and the Result Set has been marked as Complete. These
measurements will be uploaded the next time the NGi is Synchronised.
The screen will now display all results for the result set. Use the navigation (▲/▼) buttons to
scroll through the results.
Press Select to view the test point in more detail.
Scroll down to view Retests.
If UserName is being captured then the user who took the measurement or retest will be
displayed on the screen.

REVIEW RESULTS

Result Sets
Ward1
Ward2
Ward3
Ward4
Wed 04 Jan 2012 10:09
Back
Ward 1
19 Oct 02 09:25:11
19 Oct 02 13:47:02
21 Oct 02 09:05:44
22 Oct 02 08:55:17
22 Oct 02 14:30:22
22 Oct 02 14:46:22
Wed 04 Jan 2012 10:09
Back
Ward 1
21 Oct 02 09:05:44
Test Point: Centre
Centre of overbed table
Top cot or side bed rail
Floor Under patients bed
Bed Comms unit keyboard
Top Bedside cabinet
Wed 04 Jan 2012 10:09
Back
Ward 1
21 Oct 02 09:05:44
Bed Comms unit keyboard
ATP-Surface
Result:
4112 RLU 
22 Oct 02, 13:52:11
UserName
Wed 04 Jan 2012 10:09
Back
↴
1
0
0
0
Select
●
●
●
●
◒

◒
Select
T R
 
 -
X !
X 
X X
Select