Search Source List In Dialing; Configuring Call Match - Yealink VC880 Administrator's Manual

Procedure
1. On your web user interface, go to Setting > Call Features.
2. Configure and save the following settings:
Parameter
Multiparty Resources

Search Source List in Dialing

The search source list in dialing allows you to search entries from the source list when the system is in the dialing
screen.
The source list includes History, Local Directory, Cloud Contacts, Enterprise Directory and LDAP. To make the
system search a specific list, you need configure the list first.
Note:
Cloud Contacts and Enterprise Directory appear in the search source list only when you log into the
corresponding platform.
If you want to match the LDAP list, make sure LDAP is already configured, refer to
• Configuring Search Source List in Dialing
Configuring Search Source List in Dialing
Procedure
1. On your web user interface, go to Directory > Setting > Search Source List In Dialing.
2.
Select the desired list from the Disabled column and click
3. The selected search source list appears in the Enabled column.
4. Repeat step 2 to add more search source lists to the Enabled column.
5.
To remove a list from the Enabled column, select the desired list and then click
6.
To adjust the search priority of the enabled search source lists, select the desired list, and click
7. The list shown on the top has the highest priority.
The system will search the list with higher priority preferentially.

Configuring Call Match

The call match feature allows the dialing screen to display the search result after you enter the search criteria.
• Configuring Call Match
Description
Configures the multiparty
resources that the system uses to
initiate a conference call.
• Auto—the available multi-
party resources are used
automatically.
• Endpoint Built-in MCU
• Server VMR
Default: Auto.
.
| Configuring System Settings | 153
Configuration Method
Web user interface
LDAP
.
.
or .