Parameter
Channel
LAN IP Address
Network Isolation
System Settings
This section introduces how to set the power and update schedule for the RoomCast.
•
Firmware Update
•
System Diagnostic
Firmware Update
•
Automatic Update
•
Manual Update
Automatic Update
If you enable this feature, the RoomCast will check whether a new version is available at a specific time
each day. If it is, the RoomCast will automatically upgrade to the new version.
Procedure
1. On the web user interface, go to System > Update > Update Schedule.
2. Enable Automatic Update.
3. Set the Update Time and click Confirm.
Description
Configure the channel of the Wi-Fi hotspot.
•
Auto
•
36
•
40
•
48
•
149
•
153
•
157
•
161
•
165
Default: auto.
Configure the generation type of Wi-Fi hotspot address.
Auto - generate the address segment of the Wi-Fi hotspot automatically.
•
The default network segment is 192.168.144.X.
•
Manual - if the auto generated network segment conflicts with the one you
use, you can change the network segment, for example.
Default: auto.
Enable or disable the network isolation.
Default: disabled. Generally, the devices connected to the Wi-Fi Hotspot
provided by the RoomCast can access the internet. However, if you enable this
feature, those devices can only share screens but cannot access the internet.
| Configurations on the Web | 14