Power Supply Module - Toshiba NV Series Hardware Manual

Chapter 2 System Migration Procedures
2.1.3

Power Supply Module

2
22
6E8C5563
T2 series power supply modules (PS261/PS31) are converted to PS693/PS632 for nv
controller type1 light.
Table 2.5 T2 series power supply module conversion
After conversion
Before conversion
PROSEC
T2
T series
○: Convertible, ×: Not convertible
Table 2.6 Comparison of power supply module specifications
T2 series
PS261
Rated voltage AC100-240V
Allowable voltage AC85-264V
range
Rated frequency 50/60Hz
(47-63Hz)
Allowable 10ms or less
instantaneous
outage time
Rated current 53VA or less
Inrush current AC100V-15A/
AC200V-35A
or less
Output rating 5V-2.5A
24V-0.5A
Total 15W or less
Insulation DC500V-10MΩ or more
resistance (Between input and output, and
input and FG)
Dielectric AC1500V/ 1 minute(Between input
strength voltage and output, and input and FG)
Grounding Class 3 grounding
Status display POWER(Red)
RUN contact Dry Ａ contact
AC240V/DC24V-2Amax
External lines 10 terminal・M3.5 screw (Detachable) 9 terminal・M3.5 screw(Fixed)
*1: Currently used class D grounding
×: ◆Remarks：
Not all specifications are listed in the above comparison table.
Confirm the specification in the relevant instruction manual.
nv type1 light
PS693 PS632
PS261 ○
×
PS31
PS31 PS693
DC24V AC100-120V/
AC200-240V
DC20.4-28.8V AC85-264V
DC 50/60Hz
(47-53/57-63Hz)
10ms or less
22W or less 120VA(50W)
less
30A/10ms or less AC240V-12A
(DC24V) peak or less
5V-2.5A 5V-7A
3.3V-1.0A
24V-0.5A 24V-0.8A
Total 15W or less Total 35W or less
DC500V-10MΩ or more (Between input and output,
and input and FG)
AC2500V/ 1 minute(Between input and output, and
input and FG)
*1
Class D grounding (dedicated)
POWER(Green)
Dry Ａ contact
AC240V/DC24V-0.2Amax.
PS652
× ×
○ ×
nv controller type1 light
PS632 PS652
DC24V DC100/110V
DC20.4-28.8V DC85-132V
DC DC
or 50W or less 50W or less
6.5A/10ms or less 25A or less
(during rated input ) (during rated input )
5V-7A 5V-7A
3.3V-1.0A 3.3V-1.0A
Total 35W or less Total 35W or less