Toshiba NV Series Hardware Manual page 85

Chapter 2 System Migration Procedures
2
66
6E8C5563
・T3/T3H+BU31A (mounted I/O is 9 or 10)
T3/T3H
BU31A
PS IF PU I/O I/O I/O I/O I/O
(0) (1) (2) (3) (4)
(0)～(9)：I/O Slot No.
IF: Expansion interface module（not mount）
PS: Power module
PU: PU324/PU325/PU325H/PU326H
I/O: G3 I/O module（Up to 10）
SP: Space slot
◆Remark:
The T3/T3H system which contains more than eight G3 I/O modules on one base
unit cannot be converted to a system configured with the type1 light standard base
unit using the T-PDS conversion tool.
After converting G3 I/O to a system containing 8 or less modules, convert it to a
type1 light standard base unit system. Then add G2 I/O, equivalent to the deleted
G3 I/O, to another base unit.
Delete configuration
I/O I/O I/O I/O I/O
(5) (6) (7) (8) (9)
type1 light（PUM11）
BU668/BU648E
IF PS PU I/O I/O I/O I/O I/O
(0) (1) (2) (3) (4) (5)
(0)～(8)：Slot No. S0～S8
BU664 ※
Add configuration
IF PS I/O I/O SP SP
(0) (1) (2) (3)
(0)～(3)：Slot No. S0～S3
IF: Expansion interface module
PS: Power module
PU: PUM11
I/O: G2 I/O module（Up to 8）
SP: Space slot
※: Also applicable to BU666/BU668
type1 light（PUM12）
BU648E
IF PS PU ALL ALL ALL ALL I/O I/O
(1) (2) (3) (4)
(0) (5) (6)
(0)～(8)：Slot No. S0～S8
※
BU664
Add configuration
IF PS I/O I/O SP SP
(0) (1) (2) (3)
(0)～(3)：Slot No. S0～S3
IF: Expansion interface module
PS: Power module
PU: PUM12
ALL: Station bus module
or G2 I/O module
I/O: G2 I/O module（Up to 8）
SP: Space slot
※: Also applicable to BU666/BU668
I/O I/O I/O
(6) (7) (8)
I/O I/O
(7) (8)