Toshiba NV Series Hardware Manual page 71

Chapter 2 System Migration Procedures
2.3.3 Power Supply Module
2
Table 2.26 T3 series power supply module conversion
Before conversion
PROSEC
T series
52
6E8C5563
An external power supply module is not required for converting the base unit to BUM7B
which contains AC power supply. However, the built-in power supply is not 24Vdc input,
and if the existing T3 series power supply is PS332/PS332A, the voltage rating must be
changed for migration.
When the type1 light standard base unit is used, the T3 series power supply module
(PS361/PS332/PS332A) needs to be changed to PS693/PS632 for nv controller type1
light.
After conversion
PS361
T3/T3H PS332/
PS332A
○: Convertible, ×: Not convertible
*: Removable power supply terminal block of PS361 can be used for
BUM7B.
nv controller type1 light
BUM7B PS693 PS632
*
○ ○
× ×
PS652
× ×
○ ×