Part Names And Functions Of Power Module - Toshiba nv Series Instruction Manual

Chapter 1 On Installing type2 light Controllers
1.4

Part Names and Functions of Power Module

Part names and functions of power module PS693 are described.
④Power supply (100-240VAC)
Figure 1-3 Power module PS693 front panel (without terminal block cover)
8
6F8C1575
Use it with the terminal block cover while it is live.
WARNING
Never touch the terminal.
Failure to do so may cause an electric shock.
Precautions for using the power module
・This power module is dedicated to unified controller nv series
CAUTION
type1 and type2 controllers. Do not use it independently for any
other purposes.
・Take at least one second from power-off to subsequent
power-on, otherwise, the module may not start properly or
malfunction.
・If the power supply is cut off due to an output error (e.g.
overcurrent), turn off the power, remove the cause of error, and
turn on the power again. Take at least 40 seconds to turn on the
power again; otherwise, the module may not start properly.
①POWER LED
②External power terminal (24VDC)
③RUN contact
⑤Line filter ground terminal
⑥Frame ground terminal
Prohibited
Mandatory